glruff
Thread Starter
|
Former Vendor
Joined: Jul 2016
Posts: 143
Likes: 1
From: Millcreek WA.
glruff
So were am I not to post in the venders specials because I thought I posted somewhere else and this is were you moved it to. Glruff and tomorrow I will check with the advertising department Tico Adalberto because if I am not mistaking I have been posting to leaks of all sorts as I was told to do.And in order to sell a product such as mine I need to post were someone is talking about something my tool can help out with.If that’s OK with you. Don’t want to be stepping on any toes but at the same time I need to get the word out on my recently built tool so I can make sales. But if I am posting in the wrong location just do as you did move it and tell me why you did so.
FTE Leadership Emeritus
Joined: Aug 2006
Posts: 47,280
Likes: 172
From: DELAWARE, The First State
When I read your post, I saw it as an introduction post which was stated in your message.
It was moved here to the vendor forum. I can't speak to what the advertising department may have told you. It seems to contradict the site guidelines.
In the future, private messaging would be better than to post a thread in open forum address to me or others, since we may not see it.
It was moved here to the vendor forum. I can't speak to what the advertising department may have told you. It seems to contradict the site guidelines.
In the future, private messaging would be better than to post a thread in open forum address to me or others, since we may not see it.
Thread Starter
|
Former Vendor
Joined: Jul 2016
Posts: 143
Likes: 1
From: Millcreek WA.
Posting
Thank you glruff I wasn’t sure how to fully use the site but between you and Tico I now understand that private messaging to the person with the leak would be much better then posting my full ad plus pic,s so again thank you for the heads up.
FTE Leadership Emeritus
Joined: Aug 2006
Posts: 47,280
Likes: 172
From: DELAWARE, The First State
It is ok to discuss your product in an existing thread to help the original poster with a prolem.
It is not ok for you to start a thread in open forum to advertise your products or services. BTW, welcome to FTE and good luck with your business.
It is not ok for you to start a thread in open forum to advertise your products or services. BTW, welcome to FTE and good luck with your business.
