80-87 Flareside bed parts
#1
80-87 Flareside bed parts
Category: Exterior - Body Parts
Price: $100
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): Fit, S2000
Item Condition: CT
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck
I have the following for sale for 80-87 ford flareside/stepside beds.
Front bed panel - Good shape, bit of surface rust, needs paint - $100
Tailgate with raised letters - Excellent shape, very solid, minor surface rust - $250
Rear bed cross support - good shape - $100
Front bed cross support - good shape - $50
Both left and right bed sides - not the greatest of shape, need extensive repairs - $50 bucks for both
Fiberglass fenders - from an 87, fits 80-87, good shape, little crack on one - $300 for the pair, these would best be picked up in person as shipping costs would be astronomically high. They are slightly different shape than 80-86, these are totally round where as the arch on 80-86 is sorta flat at the top, they bolt right on.
Please message me if you are interested!
Front bed panel:
Tailgate:
Fenders:
Bedside:
Bedside:
Front & rear bed support:
#5
Nope, duallys are different. Flareside fenders mount to a FLAT wall. so they are flat.
Duallys mount to the curve of a standard styleside bed. not even close to a flareside
Duallys mount to the curve of a standard styleside bed. not even close to a flareside
Trending Topics
#9
Hey Keyul,
Thanks for the response in my other thread...can you send me pictures of the bottom part of your front bed panel? Maybe a few nice close-up? Mine is 98% rusted away, on the very right side there is a small area which remains. I'm wondering with a good wire brush and some primer if yours would be good for a couple of years or so...
Also, mine is an 85. Do you think this is a direct swap?
Thanks for the response in my other thread...can you send me pictures of the bottom part of your front bed panel? Maybe a few nice close-up? Mine is 98% rusted away, on the very right side there is a small area which remains. I'm wondering with a good wire brush and some primer if yours would be good for a couple of years or so...
Also, mine is an 85. Do you think this is a direct swap?
#10
Hey Keyul,
Thanks for the response in my other thread...can you send me pictures of the bottom part of your front bed panel? Maybe a few nice close-up? Mine is 98% rusted away, on the very right side there is a small area which remains. I'm wondering with a good wire brush and some primer if yours would be good for a couple of years or so...
Also, mine is an 85. Do you think this is a direct swap?
Thanks for the response in my other thread...can you send me pictures of the bottom part of your front bed panel? Maybe a few nice close-up? Mine is 98% rusted away, on the very right side there is a small area which remains. I'm wondering with a good wire brush and some primer if yours would be good for a couple of years or so...
Also, mine is an 85. Do you think this is a direct swap?