Trans problem... E4OD
Posting Guru
Joined: Nov 2011
Posts: 1,664
Likes: 4
From: Southern AZ
Thread Starter
|
Hotshot
Joined: Jul 2008
Posts: 11,231
Likes: 130
From: Thomasville, GA
I called the local Transtar dealer and gave them the part number and they quoted me $686 for it... only $100 less than the Racer X, so I'd rather go Racer X in that case if it comes down to it.
Posting Guru
Joined: Nov 2011
Posts: 1,664
Likes: 4
From: Southern AZ
Richard
Thread Starter
|
Hotshot
Joined: Jul 2008
Posts: 11,231
Likes: 130
From: Thomasville, GA
Well, now my predicament is trickier... The local trans shop here can do a full performance rebuild with a billet triple disc converter and everything for $3,200 with a warranty...
If they rebuilt it with the Racer X parts that I supply, no warranty...
Full built Racer X trans would cost about $3,500 or so before install...
NO WAY I can afford a BTS...
If they rebuilt it with the Racer X parts that I supply, no warranty...
Full built Racer X trans would cost about $3,500 or so before install...
NO WAY I can afford a BTS...
Hotshot
Joined: Jan 2012
Posts: 11,132
Likes: 3
From: Southern West Virginia
Well, now my predicament is trickier... The local trans shop here can do a full performance rebuild with a billet triple disc converter and everything for $3,200 with a warranty...
If they rebuilt it with the Racer X parts that I supply, no warranty...
Full built Racer X trans would cost about $3,500 or so before install...
NO WAY I can afford a BTS...
If they rebuilt it with the Racer X parts that I supply, no warranty...
Full built Racer X trans would cost about $3,500 or so before install...
NO WAY I can afford a BTS...
Post Fiend
Joined: Dec 2009
Posts: 15,505
Likes: 18
From: Livoina,La
Post Fiend
Joined: Dec 2009
Posts: 15,505
Likes: 18
From: Livoina,La
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Hotshot
Joined: Jan 2012
Posts: 11,132
Likes: 3
From: Southern West Virginia
I tried to get a shop here to use a kit and tc that I bought for my Ranger and they wouldn't do it. I think it was because the wouldn't be able to justify their outrageous price then. It's the only trans shop around close and they are pretty steep.
Fleet Owner
Joined: Jul 2006
Posts: 20,362
Likes: 823
From: Mi'kma'ki
here's a theory.the rebuilt trans with 20k miles didn't receive a new reverse modulator sleeve kit.the reduced line pressure while in reverse,caused your reverse clutches to not want to firmly/fully engage,and that's the metal you see in the pan.
you might be able to have a shop check the trans out,and ask them to see about just addressing these two things.the reverse sleeve kit w/ new clutch pack to restore reverse since the rest of the trans is still low miles.
new fluid of course,and install a filter inline with the cooler.
this is what id try personally w/ a lost reverse of a fresh rebuilt E40D.no way id deem the whole works bad just because reverse died with this low miles.
everything but reverse is working flawlessly right?
just an opinion.good luck.
you might be able to have a shop check the trans out,and ask them to see about just addressing these two things.the reverse sleeve kit w/ new clutch pack to restore reverse since the rest of the trans is still low miles.
new fluid of course,and install a filter inline with the cooler.
this is what id try personally w/ a lost reverse of a fresh rebuilt E40D.no way id deem the whole works bad just because reverse died with this low miles.
everything but reverse is working flawlessly right?
just an opinion.good luck.
Thread Starter
|
Hotshot
Joined: Jul 2008
Posts: 11,231
Likes: 130
From: Thomasville, GA
here's a theory.the rebuilt trans with 20k miles didn't receive a new reverse modulator sleeve kit.the reduced line pressure while in reverse,caused your reverse clutches to not want to firmly/fully engage,and that's the metal you see in the pan.
you might be able to have a shop check the trans out,and ask them to see about just addressing these two things.the reverse sleeve kit w/ new clutch pack to restore reverse since the rest of the trans is still low miles.
new fluid of course,and install a filter inline with the cooler.
this is what id try personally w/ a lost reverse of a fresh rebuilt E40D.no way id deem the whole works bad just because reverse died with this low miles.
everything but reverse is working flawlessly right?
just an opinion.good luck.
you might be able to have a shop check the trans out,and ask them to see about just addressing these two things.the reverse sleeve kit w/ new clutch pack to restore reverse since the rest of the trans is still low miles.
new fluid of course,and install a filter inline with the cooler.
this is what id try personally w/ a lost reverse of a fresh rebuilt E40D.no way id deem the whole works bad just because reverse died with this low miles.
everything but reverse is working flawlessly right?
just an opinion.good luck.
As far as the inline filter with the cooler, according to BTS it isn't needed and they recommend only running the pan filter. Hard to argue with a company that gives a lifetime warranty on their transmissions...
