Ignition switch? issue
Thread Starter
|
Senior User
Joined: Nov 2008
Posts: 190
Likes: 1
From: Broomfield, Colorado!
Ignition switch? issue
drove to class today, noticed that when i started my car, the key turned really loosely and freely. Got to campus, parked, turned the key back.... nothing happened. Took it home, pulled fuel pump fuse, drove to Advance and bought a new lock cylinder, drilled old one out to remove (key decided not to go back in), still not working. it will move freely into the start, start, and not turn off. Talked to guys at advance about the rod and switch that connect to the cylinder. anyone have any experience with this, or other advice? going to try and get things settled tomorrow. thanks! 1996 4.0 explorer xlt
Thread Starter
|
Senior User
Joined: Nov 2008
Posts: 190
Likes: 1
From: Broomfield, Colorado!
and also, if i was to need to jury rig a DIY shut off switch in case i cant things to co-operate, does anyone know which wire/combination of wires i would need to hook up to a switch out of the ignition harness? thanks
Logistics Pro
Joined: Jun 2009
Posts: 4,823
Likes: 83
From: Cedar Rapids, IA
I don't have experience with this, but will ask a couple of questions to get things started. Does your 1996 have PATS that needs to be programmed to the new key? Maybe more importantly, was the old key PATS? It does sound like you still have a mechanical issue, but PATS could make two items that will make this troubleshooting a challenge.
Now that you have a new key cylinder switch are you saying the engine will start but will not shut off with the key? If so, this would rule out PATS as being an issue, but would cause your second post to confuse me.
-Rod
Originally Posted by WillFargo
"it will move freely into the start, start, and not turn off."
-Rod
Logistics Pro
Joined: Jun 2009
Posts: 4,823
Likes: 83
From: Cedar Rapids, IA
Okay. So with the new key cylinder you're able to start the vehicle but the key cylinder switch won't shut off the engine? Can you remove the steering column shroud and watch the movement of the ignition rod?
-Rod
-Rod
Logistics Pro
Joined: Jun 2009
Posts: 4,823
Likes: 83
From: Cedar Rapids, IA
My recall is the joint is further towards the firewall than the ignition switch and activation rod goes.
-Rod
-Rod
Trending Topics
Postmaster
Joined: May 2003
Posts: 3,310
Likes: 9
From: E.Lincoln County, NC
Maybe these will help. I've placed the Ign Switch connector pin-out and wiring diagrams in a temporary folder. Also is the exploded Parts diagram for the steering column. These are posted temporarily so view/save/print or whatever but they'll be gone in a week or so.
96 Explorer Info
96 Explorer Info
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Fords to Drive Before You Die
Joe Kucinski
3 Best / Worst Features Of The 2025+ Ford Expedition
Brett Foote
10 Ways Ford is LOSING to the Competition
Joe Kucinski
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
