Technical Service Bulletins
|Publication Date: October 6, 2004|
|2005 F-Super Duty|
All 2005 Super Duty F-Series vehicles equipped with a 6.0L diesel engine, TorqShift transmission and power take off (PTO) option, built before September 22, 2004, will exhibit insufficient transmission line pressure supplied during PTO operation. Symptoms include lack of torque converter lock up and transmission line pressure below 150 psi while in stationary PTO mode. PTO operation under this condition may result in PTO unit damage, and subsequent TorqShift transmission damage is possible.
Reprogram the powertrain control module (PCM) and transmission control module (TCM) to the latest calibration using WDS release B33.6 or higher. Calibration files may also be obtained at www.motorcraft.com. If transmission damage occurs due to improper PTO function, follow normal Workshop Manual procedures to diagnose and repair. Clear diagnostic trouble codes if any, and verify the repair.
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
|042010A||Reprogram Powertrain Control Module And Transmission Control Module (Includes Time To Check For Diagnostic Trouble Codes)||0.7 Hr.|
|BASIC PART NO.||CONDITION CODE|