Fulltext TSBs

Technical Service Bulletins

TSB
10-21-5
  • ACCELERATED REAR INNER BRAKE PAD WEAR – EXTREME MUDDY CONDITIONS ONLY
Publication Date: October 21, 2010

FORD:
2010 F-150

ISSUE:

Some 2010 F-150 vehicles consistently operated in extreme muddy environments may exhibit accelerated rear inner brake pad wear.

ACTION:

Follow the Service Procedure to correct the condition.

SERVICE PROCEDURE

  1. Wash away mud and foreign material as required.
  2. Inspect brake related hardware for proper positioning and function then service as required. Refer to Workshop Manual (WSM), Section 206-04.
  3. Install Brake Lining Kit. Refer to WSM, Section 206-04.

PART NUMBERPART NAME
8L3Z-2200-ABrake Lining Kit

WARRANTY STATUS:

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATIONDESCRIPTIONTIME
102105A2010 F-150: Remove Mud And Foreign Material, Inspect, And Replace Rear Brake Linings.0.8 Hr.

DEALER CODING

BASIC PART NO.CONDITION CODE
220042

NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by “do-it-yourselfers”. Do not assume that a condition described affects your car or truck. Contact a Ford, Lincoln, or Mercury dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supercede this information with updates. The most recent information is available through Ford Motor Company's on-line technical resources.

Copyright © 2010 Ford Motor Company