Fulltext TSBs

Technical Service Bulletins

TSB
95-24-7
  • WINDSHIELD WIPERS – WASHER FLUID RESERVOIR LOOSE – VEHICLES BUILT THROUGH 8/12/95
  • COOLING SYSTEM – COOLANT RECOVERY RESERVOIR LOOSE – VEHICLES BUILT THROUGH 8/12/95
Publication Date: DECEMBER 4, 1995

LIGHT TRUCK:
1995-1996 BRONCO, F-150-350 SERIES

ISSUE:

The washer reservoir and/or coolant recovery reservoir may be loose or detached at the left tab. This may be caused by insufficient clamping force at the tab to hold the reservoirs securely.

ACTION:

Attach the washer bottle/coolant recovery reservoir to the mass air bracket with a new push pin. This will increase the clamping force and hold the reservoirs more securely, reducing the possibility of loosening. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

  1. Remove the air cleaner housing cover.
  2. Remove the air filter.
  3. Mark the mass air bracket where the left tab of the washer reservoir is located.
  4. Drill a 17/64″ hole in the left side retainer slot of the mass air bracket.
  5. Insert a push pin (388930-S) with the tip facing forward. Refer to Figure 1.


    Figure 1 – Article 95-24-7

  6. Reinstall the air filter and air filter housing cover.

PART NUMBERPART NAME
388930-SPush Pin

OTHER APPLICABLE ARTICLES:

NONE

WARRANTY STATUS:

Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATIONDESCRIPTIONTIME
952407AAttach Washer Bottle To Bracket With Push Pin0.3 Hr.

DEALER CODING

BASIC PART NO.CONDITION CODE
17B61333

OASIS CODES:

202000, 402000


Copyright © 1995 Ford Motor Company