Technical Service Bulletins
|Publication Date: June 25, 2007|
|2003-2007 F-250, F-350|
Some 2003-2007 F-250/350 Super Duty vehicles equipped with a 6.0L engine, regular cab, and 137″wheel base may exhibit a driveline noise often described as a scrapping noise and occurs in torque converter lockup between 40-50 MPH (64-80 Km/h) under light load at engine RPM 1200-1400.
Replace the driveshaft following Workshop Manual, Section 205-01. This driveshaft has a dampener tuned for this specific noise.
|PART NUMBER||PART NAME|
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
|071307A||2003-2007 F-250/350 4X2 6.0L: Replace The Rear Driveshaft (Do Not Use With 4602A)||0.4 Hr.|
|BASIC PART NO.||CONDITION CODE|