Technical Service Bulletins
|Publication Date: February 3, 2011|
Some 2011 F-150 vehicles built on or before 12/10/2010 and equipped with a compass in the Center Instrument Display (CID) only, when following the compass zone adjustment procedure in Owner Guide the system may not progress through each zone while pressing and releasing radio preset buttons 7 and 9, and may remain locked in zone 01.
Reprogram the Instrument Cluster Module (ICM) to the latest calibration using IDS release 71.02A and higher. This new calibration is not included in the VCM 2011.1 DVD. Calibration files may also be obtained at www.motorcraft.com.
|NOTE:||VEHICLES EQUIPPED WITH NAVIGATION SYSTEM ARE NOT AFFECTED BY THIS CONDITION.|
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
|110206A||2011 F-150: Reprogram The Instrument Cluster (Do Not Use With Any Other Labor Operations)||0.3 Hr.|
|BASIC PART NO.||CONDITION CODE|
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by “do-it-yourselfers”. Do not assume that a condition described affects your car or truck. Contact a Ford, Lincoln, or Mercury dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supercede this information with updates. The most recent information is available through Ford Motor Company’s on-line technical resources.
Copyright © 2011 Ford Motor Company