Recalls

Recalls Bulletins

Recall data for: 1988 MAZDA 929

NHTSA Campaign Number: 95V103005

Manufacturer Campaign Number:

Make: MAZDA

Model: 929

Year: 1988

Component:
SEAT BELTS:FRONT:BUCKLE ASSEMBLY

Manufacturers Involved: MAZDA (NORTH AMERICA),INC

Begin Date Of Manufacturing:

End Date Of Manufacturing:

Recall Type: V

Potential Number Of Units Affected: 360433

Date Owner Notified By Manufacturer: 19951215

Recall Initiator: ODI

Manufacturer Responsible For Recall: Mazda North American Operations

Date Report Received By ODI: 19950524

Date Added To File: 19950524

Regulation Part Number:

Federal Motor Vehicle Safety Standard Number:

Defect Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED “PRESS.” IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Consequence Summary:
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.

Corrective Action:
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.