rangernut09011980
August 9, 2016
1st and 2nd of several steps to building the outer shell. I have the risers welded to the top plate but still need to make mounting plates to attatch it to the inner frame.....somewhere around step 5 i will be taking about 2ft out of the center to make room for the winch..... on a sub note....the brackets only protrude about 8 inches past the frame rail ends...10 would be more ideal due to winch clearance and i didn't realize the screw up until the winch was being mounted (test fit) DO'H
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!