#1  
Old 02-12-2011, 05:46 PM
going360's Avatar
going360
going360 is offline
Junior User
Join Date: May 2007
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
No Start - CEL - Scanner will not connect

Any help would be appreciated very much...

Headed up in the mountains, lost third gear, few miles later engine quit altogether. Check Engine Light was on, cranked over fine but no fire. OBD scanner would not connect (tried 2 different ones). Seems like 3 dings followed by pause then 2 dings when key is turned to "on". All fuses where ok.