Checked for V-Ref Shorts, understand I don't have a test light for a 12v system as I normally work on 74V systems, so I used my Fluke 87V meter (and yes...meters lie!!)

J1-C2 Pin 36 to Ground - .257 VDC and on a continuity test nothing
J1-C1 Pin 45 to Ground - .031 VDC and " " "
J1-C1 Pin 32 to Ground - .032 VDC and " " "

Also checked CAN2H/CAN2L connectors and they seem to be snug...off to work and will continue pursuit tomorrow