Originally Posted by
cadriver
I bleed my clutch today and still not right, I did everything in the book and what you guys suggested, and there's no air bubbles that I can see ,it's just a pain in ****, I gave up I worked 6 freaking hours and still can't get a firm pedal, now the clutch works but it disengages very quick almost with the foot on the floor, so you guys want to know why everyone here can't have it right?
check this PDF article and there's nothing else to say!
http://www.perfectionclutch.com/PDF/v12-205-manual-excerpts.pdf
I am trying to bleed my clutch but it is not working to well. I put clutch fluid in the resovoir, opened the bleed velve and pumped the clutch a bunch of times and nothing happend. But what i also cant figure out is that i wanted to make sure my lines were not bluged, so i took my air compresser and blew through the lines, well if you blow air through the lines the fluild orair coming out of the bleeder velve should be seen or heard, but that is not happening...is there something blugged or am i doing something wrong?