Thread: Bad Batch
View Single Post
  #8  
Old 02-15-2010, 07:55 PM
fabmandelux's Avatar
fabmandelux
fabmandelux is offline
Post Fiend
Join Date: Jan 2005
Location: Paradise Found!
Posts: 26,337
Likes: 0
Received 8 Likes on 8 Posts
Originally Posted by Tom D
Thanks to all for your input. I re-ran the mix today. I used 1 gal of new methanol and 1/2 lb of KOH mixed at 140 deg F for one hour and it came out fine. These instructions were given to me by Fabman after I called him. I was lucky enough to have a "open mixer" so I could watch the mix and add more KOH if need be.
According to Fabman, the recovered methanol I used had water in it and caused the batch an incomplete transesterfication.


"After recovering methanol from glycerin, it is always best to heat the methanol to approx 195F and run through a condenser to burn off the water."

Not what I said Tom........
"After recovering Methanol from Glycerol, it is always best to heat the Methanol to 150-160 F and rerun through your condenser to Purify the Methanol.............




Tom
Glad it worked out Tom. I figured after our conversation yesterday that you would be able to save the batch. Way to go!