Thread: How 2 replace a Multi Function Switch?
View Single Post
  #6  
Old 10-19-2009, 04:39 PM
Action4478's Avatar
Action4478
Action4478 is offline
Hotshot
Join Date: Aug 2006
Posts: 10,764
Received 34 Likes on 31 Posts
On our same vintage Exploders , the cover is in two pieces ,& I didn't have to remove the ignition. With a tilt I believe you have to remove the handle . Once the covers are off ( 3 or 4 screws in from the bottom)IIRC , the switch is held in with 2 screws, takes about 10 minutes
 
Reply Like