Originally Posted by
alloro
Under the dash at the bottom end of the shifter rod is a triangle shaped piece of metal that is held on by 2 torx bolts. I think they are a #25 torx size. It's up around the top of the column and is a bit hard to see but you can get to it fairly easily. Tighten those 2 bolts and the shifter will tighten right up for you.
Alloro, I did try and do this back in February, but wasn't able to find the torx bolts.. it's bugging me again lately.
Do I have to take the steering column apart at all or am I just not looking in the right place?