Originally Posted by
greenhighboy
I was on Cranes websight awhile back and saw that putting those on made the valves adjustable, then couldn't believe how cheap they were.They were less than $30.I just rebuilt my 429 with 72 heads and had to use the shims to adjust pre load it was a PITA.
Dennis
1979 F-250 4x4 460 4-speed 33"s
1977 Highboy 429 4-speed 35"s
1969 Ranger on a 1978 F-250 4x4
frame 466 560HP 4.10's 33"s
Didn't know about the nuts.My 79 460,I did the shim thing and wasn't that bad,You just need to take your time and do it right the first time
