Originally Posted by
ncranchero
The black line that follows the blue & pink to the actuator is a vent for the axle and is just open to the air. You have others in question? General vacuum routing should be shown on the Vehicle Emission Control Information (VECI) Decal
i had that one hooked up to vacuum..that must be why that line is bent the way it is... glad that dif. fluid is heavy...
the eci info only shows the emission vacuum lines...
i have the main vacuum line that runs to the first tee..1 line runs to the climate control the other goes straight thru to a check..thru that check does it go to the upper vacuum box? by itself..that just doesn't make sense to me..
i thought i could post a pic,but i guess not
i used to like chipmunks,but not after this...
thank you for your help...