installed the following onmy lighting.
1. air raide cold intake.
2. changed mass air sensor
3. c&l plunim
4. accufB throttle body.
5. matco idler kit
6. matco 6# lower pulley.
7. entire intake sys sent to stegmier in st louis for porting and polishing,including the sc.
8. bassani cat back exaust sys w/two cqts only.
9 t 6 cold plugs.
10. transmiison valve body from chickenears.com
11. dyno tuned at a ford speed shop with a in floor dyno using a act excal 2 hand held and act software on the computer they use which includes fuel/air readings.
all of this is bolt on end result my 02 lighting has 422hp at the rear wheels.