Originally Posted by
namrehs300
Have not done that yet. The plastic handle - is that the grab bar you are talking about?
Yeah. You pop off the two covers than hide the bolt. Looks like just two bolts that hold the handle on. 99% of the plastic on these trucks are held buy clips. The A pillar cover should just pop off. I would drive around with it off, see if the sound goes away. If it does, you can add felt or masking tap around the areas that the clip slides into.
Another area that makes a lot of noise is the cover over the instrument cluster. That can be pried loose by pulling the cover towards you. I added felt to many areas here and it stopped that piece from chirping. I will post pics tomorrow.