#9  
Old 03-22-2007, 09:49 AM
LARIAT 85's Avatar
LARIAT 85
LARIAT 85 is offline
Cargo Master
Join Date: Dec 2004
Location: Florence, SC
Posts: 3,362
Likes: 0
Received 17 Likes on 16 Posts
Numberdummy, thanks for the efforts, but you STILL gave me the wrong part numbers.

Note: 1981 coil and bracket is the same as 1985, but 1980 is different. The coil and bracket for 1980 is the same as: 1975/79. Here are those part numbers.

D5AZ-12029-A .. Ignition Coil (Motorcraft DY-236) 1975/80

D6AZ-12043-A .. Coil Bracket (Motorcraft DG-314) 1975/80


I asked for the part numbers for a NINETEEN EIGHTY-THREE (1983) Ford F-150 with a 302 V-8 engine. You gave me part numbers for a 1975/80. And, furthermore, the 1981 coil and bracket CANNOT BE THE SAME as a 1985. 1981 - 1983 F-150s used an oil-filled coil for the Duraspark Ignition system, while the 1984 - 1985 F-150s used an E-Core for the EEC-IV/TFI Ignition system. These two coils are completely different animals. In 1984, Ford went with a computer controlled ignition system with engines equipped with the 302 V-8 engine. However, these are the correct part numbers that I would need for a 1983 Ford F-150 with a Duraspark II Ignition system:

Motorcraft DG314 - Ignition coil (1983)
Motorcraft DY893 - Ignition module (1983)

I still don't know about the coil bracket, however, because Ford nor Motorcraft list these as being available. I was told that the bracket might come with the coil.

Thanks for the pictures, Subford. That is exactly what I was looking for. I would have thought that the coil would be mounted upright, but it looks as though Ford mounted them sideways. Go figure.