mines an 86 with a 3 inch body lift. I can tell you the lift saved me queit a bit of time not having to wrestle with the top two bolts on the trans. But I had it out in about an hour, its not that complicated if you have the right tools and maybe a buddy to help you do the lifting and such. I start with the two driveshafts and then the transfer case. shifter for the trans and tranfer case come out. plugs and lines and dont forget your hydralic cluth line on the top of the trans, its got a kind of carter pin that holds it in. starter as well. transmission crossmember unbolt and down she comes. Oh yea, you might want to drain both the trans and T case before you start pulling. Did I miss anything?