View Single Post
  #15  
Old 04-07-2014, 10:00 PM
Bullitt390's Avatar
Bullitt390 Bullitt390 is offline
Certified Thread Hijacker
 
Join Date: Aug 2001
Posts: 12,219
Bullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud ofBullitt390 has much to be proud of
joshjones.thewelder
Quote:
Originally Posted by jayc3169 View Post
Is there a tool I can get to do that or a parts list to make one?
There is a fairly good tester at Harbor Freight that will work for a basic test in a pinch and includes the correct adaptor fitting for the regulator housing.

Called an oil pressure tester kit, works just fine for diesel fuel...

Engine Oil Pressure Test Kit

Specs call for 40+ psi at all times, better to see 45+ psi even during WOT.

Blue Spring kit should push PSI well over 55+

Josh
__________________


2006 F250 XLT 6.0 PowerStroke Diesel 4X4: SRL Custom Tune Atlas 40 FICM Rotella 0W40 DASHBOSS Ford VCM II IDS Custom Y-Pipe Fabrication
Reply With Quote