Originally Posted by
21411
I've been lurking in this section for a while. i recently purchased a '95 F-350 7.3.
i was reading that many people are using aftermarket temp gauges to monitor the engine better. making me wonder what good the stock temp gauge is?
can it be converted to a fuel level for the second tank?
Sure it can, you just need to know the ohm range of that particular gauge and have a sending unit made to match it.
I'm using my dash fuel gauge for my D2 and WVO tank levels. I had Isppro make a custom sending unit for the ohm range of the factory gauge. Tied the wiring into a relay and when D2 fuel pump is powered on it reads that tank and same for WVO fuel pump.