Thread
:
1975 Ranchero Front end Springs removal?
View Single Post
#
3
10-02-2012, 06:26 PM
creativecars1
Junior User
Join Date: May 2009
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Raise really high, put on jack stands!!!!<O
</O
Pull wheels off, remove shocks, put safety chain around and through lower control arm, spring and frame so spring does not come flying out if something happens.<O
</O
Place floor jack under lower control arm, almost touching, remove lower control arm inner nut, not the bolt yet, break lower ball joints loose, but leave nut on. <O
</O
Raise jack to compress spring a little<O
</O
Remove balljoint nut, wire spindle/brake assembly out of the way.<O
</O
You may have to pull caliper so you don’t over stress the brake hose. <O
</O
Drive out lower control arm bolt, being careful not to bump jack<O
</O
Remove safety chain and slowly lower floor jack.<O
</O
Good luck, be careful, coil springs can be dangerous.<O
</O
Reply
Like
creativecars1
View Public Profile
Find all posts by creativecars1