Thread
:
Crossmember Needed
View Single Post
#
12
09-18-2012, 01:50 PM
nicks_57
New User
Join Date: Jun 2012
Location: Seattle
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Thanks, I did grind off the heads and then tried to drive them out with a punch and big hammer but no luck. I ended up drilling 2 of the rivets out but 6 more to go. If heating the rivet is easier, I'll try that.
Reply
Like
nicks_57
View Public Profile
Find all posts by nicks_57