2007 Expedition 70k miles. Friend purchased from dealer and before veh made 2 miles the wrench on dash came on, check engine light, it went into limp mode.

I cleared codes and it was good for about 2wks. multiple codes now

Veh cuts out, gauges go all over and read wrong, speedo quits, goes into limp mode. Shut veh off and it did not want to restart. Cleared codes and it started but went into limp mode, seems like all modules, computers and dash are losing power intermittently.

I am curious if someone has ran into this issue. Seems to me its a loose or partially broken wire or possible computer itself. In all my years of messin' with fords I have changed ZERO Computers.

Partial List of Codes

P1500
P1000 KNOW THAT ONE
U0155
U0101
U0100
B2916
B2917
U0121
U0151
U2199
U2023
U2471
B2293
U1900

I think its all pretty much related because of a power loss of sorts...

Just so it is clear I can look up codes but wondering if others have seen same issue with so many multiple codes that seem related to power failure.