Originally Posted by
jowilker
3 wires is correct, I don't recall which is which but it doesn't matter.
1 is tail light, license plate.
The other 2 are left & right turn signal/ brake. The brake & ts share so turn the ign. switch on move the ts to start it flashing and with a circuit tester you can correctly identify left or right at the rear.
Piece o cake.
John
Thanks for the response, John, but mine has 4 wires - 1 yellow, 1 green, 2 brown. If the brown ones are for the running lights, then it probably doesn't matter which goes to which but if not, then I'll have to figure that out. I don't really have a circuit tester, but I'll figure something out.
Thanks. If anybody knows specifically what each colored wire is for, that would be helpful.
Thanks again.