Originally Posted by
TNScrambler
Do you have the a-pillar trim on the driver side? Mine is cracked through the mounting screw hole beside the dash. I have previously found and replaced the black plastic trim around the speedo and headlamp switch etc as mine was cracked on the mounting hole. I also previously found and replaced the dash pad that goes above the radio and over the glove box with a nice un-cracked unit.
I still need to do carpet and headliner, I found a carpet kit through rock auto that you can buy extra mass insulation and what not, so I plan to use that, but want to wait till after the trans swap so I know where to cut for the shifter etc..
Justin
A- pillar and the piece under the wheel with the pocket are the only two pieces I don't have.
Where in the world did you find a dash pad that wasn't cracked?