So my 1995 F250 had a minor fire roughly a year ago that caused some of my wiring harness to be destroyed. After searching for a replacement one with no results I decided to take the harness out of my 1992 project 250 to replace it and just replace the 92's when I finally found one. Both trucks are 250s, xlt, 4x4, automatic, and 351s. I have both harness out of the trucks and I laid them side by side to make sure they are both the same except for one part. I need to know if I can still make this swap work and how. Any help would be greatly appreciated. Thanks.
<a href="http://s1102.photobucket.com/albums/g447/shaggy_32003/?action=view&current=Photo_5847722A-B82E-C9F2-B5DE-916CA1CE5E60.jpg" target="_blank"><img src="http://i1102.photobucket.com/albums/g447/shaggy_32003/Photo_5847722A-B82E-C9F2-B5DE-916CA1CE5E60.jpg" border="0" alt="Photobucket"></a
<a href="http://s1102.photobucket.com/albums/g447/shaggy_32003/?action=view&current=Photo_526580B9-288B-1EF2-5945-6A8075CD8549.jpg" target="_blank"><img src="http://i1102.photobucket.com/albums/g447/shaggy_32003/Photo_526580B9-288B-1EF2-5945-6A8075CD8549.jpg" border="0" alt="Photobucket"></a>
What is this part?
<a href="http://s1102.photobucket.com/albums/g447/shaggy_32003/?action=view&current=Photo_664A1D7A-E891-0648-5566-78C2EBBB9EFD.jpg" target="_blank"><img src="http://i1102.photobucket.com/albums/g447/shaggy_32003/Photo_664A1D7A-E891-0648-5566-78C2EBBB9EFD.jpg" border="0" alt="Photobucket"></a>
The above picture is of the connector from the 1992.
<a href="http://s1102.photobucket.com/albums/g447/shaggy_32003/?action=view&current=Photo_0B4B3D58-ABB2-808A-86C3-E203A460221E.jpg" target="_blank"><img src="http://i1102.photobucket.com/albums/g447/shaggy_32003/Photo_0B4B3D58-ABB2-808A-86C3-E203A460221E.jpg" border="0" alt="Photobucket"></a>
This photo is of the connector from the 1995.