Originally Posted by
rla2005
It is possible to have a TPS or VSS problem without triggering a code. You can test the TPS output with a meter to see if there are dips/ripples in the output signal. The VSS is a little tougher without an oscilloscope.
Use this as a reference for the TPS:
Ford Fuel Injection » Throttle Position Sensor (TPS)
Many times when the VSS has a problem it will trigger a code, but for you that is not the case. If the TPS appears okay, then I would suggest trying a new VSS.
ok thanks so much, im going to look at the TPS, I think i replaced the VSS years ago. Ill report back