6" Skyjacker lift, from a 1995 Ford F350
$350 obo Located in Glenville WV, 26351 prefer pickup of the items, but will consider ups ground............ includes.................... 2 front shocks 2 front springs 2 rear springs 2 rear add-a-leaf 4 rear blocks drop pitman arm 2 front spring plates 2 rear spring plates https://i229.photobucket.com/albums/...mper/020-3.jpg https://i229.photobucket.com/albums/...mper/019-3.jpg https://i229.photobucket.com/albums/...mper/018-3.jpg https://i229.photobucket.com/albums/...mper/017-3.jpg https://i229.photobucket.com/albums/...mper/016-3.jpg https://i229.photobucket.com/albums/...mper/022-3.jpg https://i229.photobucket.com/albums/...mper/026-3.jpg https://i229.photobucket.com/albums/...mper/027-3.jpg The last pic is the truck with the lift installed.......... https://i229.photobucket.com/albums/...repair/042.jpg |
Just got a 96 E-350 with a Powerstroke and an auto tranny. ITs a Quigley 4wd conversion. I want to sell the motor,tranny,transfer and all the associated wiring and fuel supply for $2000 or trade. Dave i know some of your buddies would be interested in this.
|
I am looking for a decent 78/9 bronco. Doesnt have to be running. All im interested in is that is has decent quarter panels,rear floor and roof.
|
Need some 8 lug 16.5 white spoke wheels. Preferably 10" wide.
|
i have a 12 inch lift for a 80-97 f 250-350 i will sell or trade
|
Hello all! I am planning a trip south in early February if anyone needs anything let me know, there's a lot of rust free parts down there. I usually bring beds back but I can get doors, cabs, fenders, ect for most makes and models.
|
73-79 crew cab an backdoors if the price is right.
|
Still have these 15x10 wagon wheels for sale that fit a 1/2 ton Ford truck or Bronco. They need a little cleaning and painted but they're in good shape. They are a spare set that I got with my '75 Bronco. Could maybe deliver or meet up for delivery depending on where you're at. I'd like to get $100 for the set...?
http://www.frontiernet.net/~slray/Te...nWheels-02.JPG |
Ok i got to unload some stuff.
Dana 60 front. Out of an 89 F-350. Its open and has 410 gears. $800 Detroit lockers. Both are 30 spl for a rear Dana 60. One is new and never installed. The other has 500 mi. Ill take $400 each. 456s they are on the used locker. Bought new when the locker was bought. $125 Need to sell this stuff to buy more stuff. |
Have all the highsteer/crossover stuff for the 60. Make me an offer.
|
I need a set of hubs and spindles for a srw Dana 60 front.
|
need hubcaps
does anyone have these hubcaps that you are willing to let go of
http://i762.photobucket.com/albums/x...00992727PM.jpg |
1988 F150 4x4 300 6 cyl. short bed for sale.
Here is my 1988 F150 4x4 300 6cyl. 5 Speed with 164,000 mile truck. Needs clutch, I have a clutch kit for it, I was also going to put a rear main seal (I do not have) in it when the clutch was put in, just due to the miles but never got it in. I have replaced almost all the brake lines. Air still works, AM/FM Cassette radio. The inside of the bed is like new, it has had a bedliner all its life. It has a vinyl floor with floor mats. Seat may need attention. Needs tailpipe from muffler back. The worst rust is what you see. It starts and runs good. I would like to have $1750.00. I bought it used with 5000 miles. I really do not want to sell it but I have too many projects.
https://www.ford-trucks.com/user_gal...231807.520.390 |
looking for 15x8 or 15x10 beadlock wheels or simulated beadlock wheels for a 95 f150.
also really wanting to find a roll bar/light bar that will fit a stepside 95 f150 (probably something out of a ranger). |
need some 16.5x12 wheels
any have a set of 16.5x12 and a f350 crossmember bracket that bolts to the frame to the crossmember
|
All times are GMT -5. The time now is 06:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands