You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Any luck finding the alternator bracket? I'm lookin for one myself. Also what are you putting pto on? I just priced a new pto unit from Point Spring & Driveshaft in Fairmont for $250, including a cable shifter, for a 10,000lb pto winch i'm putting on my mud bogger. Thats about the same money people are asking for used when you can find'em, Dave.
Yeah i want a PTO winch. The unit you priced was it for in/out or just in? Nope havent found a bracket yet. Actually thinkin bout either sellin the 460 or holdin it for a future project.
__________________
Swap in an idi today and get a free mytruckcantgetoutofitsownwaybutimdifferentinadowns yndromekindofwayandmymomlovesme sticker.
The pto unit I priced is a one direction, one speed model, but you can get in/out with your transmission. The one I priced was for a NP205 t-case, this way with the pto on my t-case and a NP435 tranny, I can have 4 different spool in speeds but only one spool out spd, but usually we just spool out cable in neutral by hand. I'm using a 10,000lb Garwood winch from the front of a 2 1/2ton 6x6, got one of those for $295 spooled with good cable. You can get the yokes and pto shafts from your local Napa store.
As for the brackets for the 460, I understand the frustration, thats why I still have the 409 in my big truck, we'd probably be better off buying them from Bronco Graveyard, premium price but I think they are a site sponsor though. Hope this helps, Dave.
Yeah, they still have them, here is a partial link to their site, adelmans.com/atruckparts.html, click on the yellow "CLICK HERE" and youll get their pdf flyer. Near the bottom of the flyer is a little box that with new/used winches in it. 10,000lb pto winch with cable $295. Around here if you can find'em, folks in the bulletin boards wanted close to $1000 for them.
Some friends and I got together and went up and bought some for our trucks, well worth the drive.
LOL, gettin some other type of axle? My apologies, the winches used to be on the bottom of the flyer next to where it says EXPORT PARTS. They have changed the flyer recently, it didnt have pics of the trucks on the right the last time I looked. Sorry, Dave.
Got a 360 and 2wd C6 for sale. Only 46k original miles. I have engine stands for it to fit a 2wd and 4wd. Also have a 4spd bellhousing and flywheel but no clutch. Asking $300 but i will entertain trades. Someone help me get rid of this so it dont goto waste.
__________________
Swap in an idi today and get a free mytruckcantgetoutofitsownwaybutimdifferentinadowns yndromekindofwayandmymomlovesme sticker.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Archived WV Buy/Sell/Trade Ads
