Looking for 390 crank and rods in Alaska.
Any of you Alaskans have a crank and rods laying around for the 390? I want to start a new engine build up for my plow truck, but I don't want to go back to the 360.
I would consider a rebuildable longblock of the price was right. If you have one please email me at schu_schu.net (replace the _ with an @). Thanks, schu |
man, the only way I know to get a set of crank and rods I would trust is through a place like PAW, summit, jegs, etc. You can get em pretty dang cheap and they come with warranties. The odds of finding a 390 just laying around are pretty slim unfortounately.
|
I have a 360 laying around but the only 390 I have is in my plow truck and I am using it. I would keep an eye on ebay. You can find some good deals there from time to time.
|
how much for the 360
how much for the 360 and will it spin ? :-fire
Originally Posted by Crumm
I have a 360 laying around but the only 390 I have is in my plow truck and I am using it. I would keep an eye on ebay. You can find some good deals there from time to time.
|
Bob,
I was going to use the 360 block and just replace the rotating assembly unless I can get a rebuildable 390 long block to build on the stand. The 360 in it now runs, but it's old and tired. I may sell it, but not until I have the 390 installed since I can't go without my plow truck during the winter months. I'll update this thread when the status changes. schu |
Originally Posted by bob arrington
how much for the 360 and will it spin ?
|
Opps, I thought you where talking to me... sorry
|
yea, if you can give me some information on fixing my 1990 ford ranger XLT, I will give you two 390 Cranks and take them out the engines myself.
Arlandra Upton Sr. Togiak, Alaska (907) 493-5261 6-10pm. ONLY |
what info di you need,bob
|
hey
i need a manual bellhousing for a 360/390 let me know if you got one, or i would like a divorced c6 that works
ray |
All times are GMT -5. The time now is 10:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands