Aussie Members, Introduce Yourself & What you do.
 

Brian;
We are the speedliner Installer for Sydney area, can we set up a little display?

Here is the product, or go to Speedliner Australia Main Page - Ute Liner
Before
http://i713.photobucket.com/albums/w...1-01104203.jpg

After;
http://i713.photobucket.com/albums/w...1-03111117.jpg

http://i713.photobucket.com/albums/w...eforeAfter.jpg

http://i713.photobucket.com/albums/w...ldersTruck.jpg

http://i713.photobucket.com/albums/w...eforeAfter.jpg

Most utes are $795 (dual cab) to $995 for single cab, F-series 8ft beds are $1195. Doing the upper edges are $135 extra on the F-series.

If your giving prizes away for nicest truck we can ofer up a partial discount as prize.

Jeff


Jeff

Hi Jeff, if you can put a display together in the back of your ute I can't see any problems with having a display. When we park the F-series up, we'll get everyone to have their vehicle with the fronts facing the viewing area, and you can have your vehicle with the load area towards the front. I'm sure we'll get lots of ute drivers looking at the F-series display so make sure you have a good stock of business cards to give out!

Thank you Brian and SSSimon. Will do.

Jeff

G''day Jeff. I agree with Simon if your are talking about the GTG in Canberra. But I dont believe non sponsors can advertise on this site m8. Hate to be a stick in the mud.

Pffft stick in the concrete ya mean. :-X07

hey all!
 

hi, been a member for a long time! (very old user name)
we have a few effies, an 80 xlt shorty 4wd, 79 fe 6cyl lwb, 1 spare 76 v8 shorty, and the wifes 73 bump 6cyl efi 4sp auto!
will post pics soon!

megatron.

jeez ya got enuf there to start ya own card yard. Welcome to the Aussie Chapter bruva.

Tassi F series die hard
 

Hi Brian,
My names Luke and I live and breath Fords and F series trucks. I currently own a 94 F250 supercab 4x4 diesel. Its mostly stock the way God (Ford) intended. My daily job is to own and run and F series modification and repair business for all F series Trucks, new and old, with Automatic Transmission overhauls and bullet proofing my speciality.
I too would be interested in joining the fold and making the trip to Canberra next year.

regards
Luke Korotki c/o
POWERSTROKE AUTOMOTIVE

G'day Luke and welcome aboard. M8 if you ever get ya shop up and running , give us a yell. I would luv to throw some spanners on F trucks. Will keep ya posted re Canberra. Merry Xmass

Strawbs82 any pics yet?

Hi guys and girls. My name is Darren and I've only been a proud Effie owner for 8 months, although always been a BIG Ford fan, F trucks especially.
I run a commercial sand quarry in W.A and am in the middle of rebuilding my '79 F100 6x4.

G'Day Darren and welcome to FTE m8. Just had a look through ya album. Thats one tuff looking truck. You must be proud as punch after putting all that effort in. Great job m8.

Dags did you have any problems with government or registering a vehicle like that in your avatar?

I have plans for a future build but I am pretty sure they will say no to most of my ideas.

No it wasn't really any problem.
Double skin chassis and brakes on the rear was necessary along with the obvious engineers sign off.
It's only good for 1900kg's on the tray but can pull 4500kg's gross.
Once the rebuild is complete and the bank balance is restored I'll be taking it to 6x6 status, but that's going to take some work.

Thanks Brian, but I cant take all the credit. The conversion was half done when I got it, and I just got it finished and signed off.
I will be VERY proud after this final build is done though, it'll be one nasty weapon.