I did all the wiring for the VAPS, however did not plug any of it into my harness. The power steering works fine for me. However if you wire it all in, the wheel will turn like butter. Mine just feels like any car/truck with normal power steering.

This may have already been asked (I'm reading through the 100+ pages of posts), but does anyone have the images from the original posts saved anywhere? They're no longer working. :(

Bump. I did some reading as well and wanna see the pics! :-drink

Ditto - where are the old pix?

I have been looking all over for a thread like this, I finally found it, and there are no pics.....what's up with that?

I'm working on doing a complete write up on this swap, but have not had too much time lately.

There are a couple of pics at the beginning of my build thread if you care to take a look.

It can be found here:

https://www.ford-trucks.com/forums/1...t-fnstein.html

Pictures of front suspension?
 

I'm getting everything lined up for 69 f100 so all the help and pictures is appreciated. Send me what you have if available, please :)

Hey I know this thread is old but can anyone tell me if it is just the 03-07 crown Vic's or will the years all way up to 2011 models work also I see a lot of these just wondering if they will work also

Hey guys is it just the 03-07 crown vic or will the years up to 2011 work also ? Are the suspensions the same ?

AFAIK 2000-2009 will work.

As I understand the years they are '03-'11. Mine is a '05

Ok guys thanks they look the same so I figure the Lincoln and grand maquis are also the same as well thanks for the reply guys maybe I can source one cheap for my 56 I just missed a 04 for $250 missed it by a day lol

Subd...looking and learning!:-X04

2003-2011 models work

Carcrafter you live! Long time no see. How did the all wheel drive conversion go?