You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Hi,i would like to know if a 351 out of a 78 van will swap into a 77 F250 4x4 400 4spd ,will the flywheel work or does one from a 460 work? or am i out of my mind!!!!!
which 351? if it is a 351w, than no, you will need other goodies to make it work, like a bell housing, etc... if it is a 351m/400, then it is bolt in if you have the rigt flywheel or pull the one off the old engine
__________________
George, 92 f350 CC dually, Diy PSD conversion, 2wd, auto, long bed. 3in dp,no kitty.6637. 140v idm. PHP 6 pos, hpx,hot pedal.flux capacitor,281,000 and counting. rosewood stage ones.hers; 97 expedition, no mods yet! Louisiana members map
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Hi,i would like to know if a 351 out of a 78 van will swap into a 77 F250 4x4 400 4spd ,will the flywheel work or does one from a 460 work? or am i out of my mind!!!!!
92 f350 CC dually, Diy PSD conversion, 2wd, auto, long bed. 3in dp,no kitty.6637. 140v idm. PHP 6 pos, hpx,hot pedal.flux capacitor,281,000 and counting. rosewood stage ones.hers; 97 expedition, no mods yet!
