I've got a 76 F250 with a divorced np203 tcase in it and I'd like to swap to an np205. I'm just wondering if I'll need different mounts for the 205.

 

I did this swap about 3 months ago on my 75 f-250. I used a 76 parts truck. The crossmember in my truck was already drilled. The 205 uses different brackets and the drive lines are diferent lengths. If you have any other questions about this swap please e-mail at richard412(No Email Addresses In Posts!) I run a 460 and so far the transfercase is holding up fine.

 

 

I have the same situation here with my 77 F-250 divorced TC(its a 203) and the previous owner threw in a 205 PT case to. So I need(and must) know what I need to do to change over the TC to the 205 and the other parts to do it all completely and of course right.
thanks everybody
SCOTT

 

You do realize this is a 15 year old thread dont you?