I am in the process of putting some quick disconnects on my wires coming from the column in preparation for putting toyota pwr steering in. I am using my stock column. I did one wire and was checking to make sure everything was working. I noticed that my parking lights are not working. I was wondering in the disconnect connection is could be causing this or do I need to check else where. I do not know if they were working before I cut the wire and put the new connection in. They were working the last time I check sometime ago.

 

Park lights come from the headlight switch and do not run down the column. Horn and turn signals (if you have them) are all that are typically on the stock column.