roll bars

wiggit1971 · #1 (**permalink**) 12-23-2001, 05:03 PM

just picked up a 2000 f250 xltsd crew cab, short bed, fabtech lift and want to put roll bars in the back. so far i am not having any luck finding anything :-( i need help finding info or a sight. i would like to get good ones for safety reasones( snow, ice, weird wisconsin weather) .and does any one have this on their truck? do you like it and how does it look? any help would be greatly appriciated.

Joego · #2 (**permalink**) 12-31-2001, 02:44 AM

I want roll bars on my truck too, but I go to shcool and don't have enough time for a real job yet, so i'm stuck roll bar less.

good luck, with em!

gamehunter · #3 (**permalink**) 01-11-2002, 06:54 PM

almost 99% of all roll bars out there are "show bars". They attach to the bottom of the bed at the back and generally run about $500. If by chance you do roll over it will protect the cab enough so it wont be squished, unless its a VERY severe roll. If you want optimum protection you are looking at spending $2000+ for a real roll bar that attaches to the frame through the box. You shouldn't need one of these unless you do some serious off roading with a built vehicle. I have heard that Grizzly is about the best as far as show bars go.

Desertdawg · #4 (**permalink**) 01-12-2002, 01:51 AM