New Bumper..Pictures too.
#1
New Bumper..Pictures too.
Hello,
This past fall, i have been enrolled in a welding class and I needed a project to make. Therefore, I thought I could build that new bumper that I have been wanting for 3+ years now. Here are some build pictures and what it looks like on the truck. The materials were about 200 and the powdercoat was 100. I need to find some diamond plate to put on the top but thats too much $$ for now...let me know what you think.
-Jordan
This past fall, i have been enrolled in a welding class and I needed a project to make. Therefore, I thought I could build that new bumper that I have been wanting for 3+ years now. Here are some build pictures and what it looks like on the truck. The materials were about 200 and the powdercoat was 100. I need to find some diamond plate to put on the top but thats too much $$ for now...let me know what you think.
-Jordan
#7
Trending Topics
#8
#9
#12
Thank you for all of the comments. I plan on cleaning/priming/painting the frame when spring comes around (it was about 15 degrees out today). As I mentioned, I also want some diamondplate to put along the top (and possibly a skid plate) but funds are low now. I am a senior at the University of Illinois and this has definitely been one of the best classes Ive taken. I used about 22 feet of 3" od steel tubing with 1/8" wall and I think I have somewhere around 20-24 hours of work into it...mainly due to all of the fabrication and figuring out the angles. I think I could make another in much less time. I made a CAD (autodesk inventor) technical drawing of it that I can post with a little updating.
-Jordan
-Jordan
Thread
Thread Starter
Forum
Replies
Last Post
RMBC Freeride
Excursion - King of SUVs
43
12-30-2017 03:38 PM
OldGoldie
1987 - 1996 F150 & Larger F-Series Trucks
10
03-17-2017 10:49 PM
OldGoldie
1987 - 1996 F150 & Larger F-Series Trucks
41
02-28-2017 07:34 PM
Bob Gervais
1987 - 1996 F150 & Larger F-Series Trucks
49
01-29-2016 06:18 AM
lossscause
1987 - 1996 F150 & Larger F-Series Trucks
33
05-07-2013 09:28 PM