Archived MD Buy/Sell/Trade Ads
#91
WTB
Looking to buy local since shipping would not be worth it.
I have a 2010 F250 SRW and i want the factory bed extender plastic thing.
2010 Ford F-250 and F-350 Accessories
P/N 8C3Z-99286A40-C
Looking to keep the price down .
I have a 2010 F250 SRW and i want the factory bed extender plastic thing.
2010 Ford F-250 and F-350 Accessories
P/N 8C3Z-99286A40-C
Looking to keep the price down .
#92
Brush Guard for sale
I have a Manik Brush Guard that I believe is for a 1997-2004 F150 and maybe F250 light duty. It has a little bit of surface rust on the bottom but overall good condition. Im looking to get $100 obo. I live in Dundalk Maryland and you can get ahold of me through here or email me ludacris16444@yahoo.com.
Thanks Tim
Thanks Tim
#93
Im Selling my 1996 F150 i just bought its a XL 4x4 with the 302 its the e40d with manual lock out hubs the 4x4 works the truck has a lot of dents it was an old work truck
book value is almost $4,000 asking $2,500 obo
book value is almost $4,000 asking $2,500 obo
#94
REPOST:
I found in my shelves a brand new (but a number of years old) K&N oil filter that fits many Ford 3.0 - 3.8 - 4.0 engines. It's a K & N HP 3001. If anyone wants it, first one to pick it up at my house can have it...no charge. I think I had purchased it for my old '86 T-Bird that had the 3.8 (?) V6 in it. Or I can bring it to a meet.
NOTE TO THE POWERS THAT ARE:
I thing giveaways should NOT be purged from here.
I found in my shelves a brand new (but a number of years old) K&N oil filter that fits many Ford 3.0 - 3.8 - 4.0 engines. It's a K & N HP 3001. If anyone wants it, first one to pick it up at my house can have it...no charge. I think I had purchased it for my old '86 T-Bird that had the 3.8 (?) V6 in it. Or I can bring it to a meet.
NOTE TO THE POWERS THAT ARE:
I thing giveaways should NOT be purged from here.
#95
I have a set of tail lights for 04-08 F150's with a regular bed, not step side. Left light is in perfect shape, right side light has about 2.5 inch crack on it from a mailbox in the blind spot backin out the driveway one day . Other then that both the lights are in great condition. If anybody is interested shoot me a PM for pics, price discussion, ect. Thanks.
#97
FS LNIB
I have a Bak Industries bakbox. They sent me one that is too wide, my bed is around 60 and the one one they sent is 63. I don't feel like cutting it and making it fit. They already sent me a replacement. So here it is. Everything is included as it comes from the factory you just have to trim the sides to make it fit.
Asking 200, will meet around the base in SOMD.
Asking 200, will meet around the base in SOMD.
#98
4 wheels/tires
For Sale- 4 white wagon/spoke rims 5 on 5 1/2 these were on my 62', the tires on them are showing age, still plenty of tread. 225/70 15's Goodyear eagles. would look good on a 70's/early 80's era truck, center caps are not that great but look ok. $50 for all 4.
Charlie
Charlie
#99
I just realized that I have the 25+ posts needed to post an ad, and I didn't just run up the post count by making useless replies!
OK, last month I parted out a '92 F250 4x4. I kept the engine for myself (5.8) but there are some body parts
passanger side door and fender, both are completely rust free and have no damage. Blue and white 2 tone. The door has power window and door locks, no door panel.
The center grille is all in one piece, all of the tabs are in tact. Passenger side headlight trim/side marker assembly is in nice shape.
PM me or post here (if that's allowed). I live in the north east side of Baltimore, very close to the beltway and I-95.
OK, last month I parted out a '92 F250 4x4. I kept the engine for myself (5.8) but there are some body parts
passanger side door and fender, both are completely rust free and have no damage. Blue and white 2 tone. The door has power window and door locks, no door panel.
The center grille is all in one piece, all of the tabs are in tact. Passenger side headlight trim/side marker assembly is in nice shape.
PM me or post here (if that's allowed). I live in the north east side of Baltimore, very close to the beltway and I-95.
#101
I have an ULTRAGAUGE (UltraGauge Automotive Information Center and OBDII Scan Tool) I removed from my 6.0 diesel as it doesn't support diesels very well...... It's not an expensive instrument, but it had coolant temp on it which I wanted.I need an oil temp gauge and the UltraGauge doesn't have it so I bought a SCANGAUGE to use.
If anyone (with a gas engine) would like this ULTRAGAUGE I have, it's available immediately. Asking $45.00 for it, shipping extra.
!!!!!!!!!!!! SOLD !!!!!!!!!!!!!
If anyone (with a gas engine) would like this ULTRAGAUGE I have, it's available immediately. Asking $45.00 for it, shipping extra.
!!!!!!!!!!!! SOLD !!!!!!!!!!!!!
#103
It does IF your ODBII supports it.....Think it's called TFT..... Trans Fluid Temp. Did you check the web site?
#105
doesnt say anything about tranny temp but im still interested, if you still have it this weekend i might come up and get it if your around, are you still camping up north?