You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Well guys,
Pat mentioned something in the lastest PM about this and me being the good outstanding chapter member that I am (more like bored chapter member) I thought I'd start a thread and get some ideas rolling for this. Kenny & I will both be in Columbus working for NE Machinery (I think that shop is doomed....) so we'll both be closer to the general population of the chapter. Let's figure something out!!!
-Jake
__________________
Official NE Chapter Photobucket Guy
69 F-250 "Mild" 390/C6 3.54 LS 3rd Generation Family Owner
74 F-250 4x4 390/C6 3rd Generation Family Owner
09 GMC Sierra 1500 (Daily Driver)
well, looks to me 2 things need to be decided. time and place. sooooo i guess, some people need to input when they'd like to meet and suggestions on where. personally, i'm good for anytime (weekend prefered) any place. sooooooo any other takers?
__________________ '81 F-150:300 I6, .060" over, flat tops, Comp Cams 260h, Headman header, Clifford intake, 4spd 4x4...project truck
"I'm not trying to turn my 300 into something its not, I'm turning it into something the factory wouldn't let it be." '03 F-150:4.6L V8, 5spd 4x4...daily driver Nebraska Chapter Member
i'm pretty sure that weekends are probably the best way to go...any thoughts on where we should have it? do u guys think that having it in the eastern part worked good or does anyone think that we should move it a bit to the west to help out the guys out there?
__________________ '81 F-150:300 I6, .060" over, flat tops, Comp Cams 260h, Headman header, Clifford intake, 4spd 4x4...project truck
"I'm not trying to turn my 300 into something its not, I'm turning it into something the factory wouldn't let it be." '03 F-150:4.6L V8, 5spd 4x4...daily driver Nebraska Chapter Member
Well, I guess location would kind of depend on who would be coming, but I certainly don't want to shut out the guys in the central/western Nebraska. I know that's quite a drive for you Kenny.
it won't be so bad for myself in the summer b/c i'll be in columbus w/ jake so we could probably carpool or something, but there are other guys out here (i think) that might not want to drive sooo far, i'd assume anyway...but i guess we'll need their input for that, eh? so how many guys do we have in the chapter from the central/western halves of the state?
__________________ '81 F-150:300 I6, .060" over, flat tops, Comp Cams 260h, Headman header, Clifford intake, 4spd 4x4...project truck
"I'm not trying to turn my 300 into something its not, I'm turning it into something the factory wouldn't let it be." '03 F-150:4.6L V8, 5spd 4x4...daily driver Nebraska Chapter Member
I need to get map and kind of plot where everyone is at. Like you said, though, if they don't chime up, and be a little active, it's kind of hard to consider them.
I did have a thought, of instead of having it at a bar (which about killed me with the smoke!) would be to have it at a state park, a lake, or something along those lines. Maybe have a bbq, or something. Have to be a nice day, but we could always plan for a rain day also. Just my .02.
ya i would imagine that would b a better idea, it was kinda crowded in that bar too, but there are worse things, right?
__________________ '81 F-150:300 I6, .060" over, flat tops, Comp Cams 260h, Headman header, Clifford intake, 4spd 4x4...project truck
"I'm not trying to turn my 300 into something its not, I'm turning it into something the factory wouldn't let it be." '03 F-150:4.6L V8, 5spd 4x4...daily driver Nebraska Chapter Member
Well, I'm not sure what I was thinking cause Kearney Cruise Night is in July, but maybe we could plan something for late May/early June and then have something at cruise night for us "westerners"......
-Jake
__________________
Official NE Chapter Photobucket Guy
69 F-250 "Mild" 390/C6 3.54 LS 3rd Generation Family Owner
74 F-250 4x4 390/C6 3rd Generation Family Owner
09 GMC Sierra 1500 (Daily Driver)
Well, if it's okay with George, and I definitively don't want to impose here, but if he's okay with it, maybe we could meet at his place in Kearney. I know Rob is going. I'm going to check on hotels tonight (since I've talked the wifey into it WooHoo!).
I'll be at cruise night this year for sure, no ifs ands or butts about it. Guess I'll have to drive my psd since my 58 has a long ways to go. Other than that I have started racing last weekend and plan to be at the track every sunday night and a handful of Saturday nights too, so maybe just plan a date and I will see if I can make it or not. I have no ideas as of were tho.
__________________ Anthony
1958 f100 big back window 300 6cyl
1971 f100 sport custom
2011 f150 fx4 ecoboost tow max crew cab
2007 Edge AWD Sel
9A Racing
If you boys want to gather at my place that would be fine. We have a little get together on the Saturday evening of Cruise night at my house. There is food, its close to downtown and you can bring your own drink. Of course if your not of age be careful because I have quite a few friends that work for the Sheriff's Dept and Kearney Police Dept. that will be there. Of course you will also have to listen to all my friends drone on about their "rides".
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Anthony
