I'm Learnin..

I pulled off the air filter yesterday evening, I'm pretty sure its a K&N.
I cleaned it but didn't have any oil for it. I think I will replace it with a 6637..
The K&N makes me nervous, living on a gravel road and all..
Is there any advantage to leaving the Filter box add-on?

is this the coolant additive?

http://cgi.ebay.com/ebaymotors/2-BOT...QQcmdZViewItem

 

That's the stuff check with you local stealership and see how much $$$$ they getting for it .Don't run that filter with out oiling it , it will disintegrate and end up in your turbo AGHHHHHHHHHHHHHHHHHH..............

 

Agreed. Don't run that gauze filter dry. It will be no more effective than breathing through a t-shirt. I've got a can of filter oil I'll let you have. Holler at me this weekend if you want to, I'll give you a filter servicing kit and that grill if you want them.

 

Ahh yes, I forgot about the grill.. thanks

lets all meet up at a burger joint again.

 

I can do Sat but will have to be 11 or 12ish Dad and I have a job to go estimate in the afternoon.

 

I know I don't have a diesel but I will be there!!! LOL

 

Anyone ever been to Hank's in Ward? Good Burgers

I'll be ok to drive it that far right?

Joe

 

I love Hanks, but Renee is out of town.....so I'll need someplace with a playland since I'll have both kids. Pretty much narrows it down to a McD's or a BK.

Shouldn't be an issue with that little drive Joe.

You're always welcome to hang out in the smoking section Andy.

 

Does anyone have a bench bleeder kit I can borrow?? I got all my parts to do the brakes. Maybe Sat evening I will be driving Mater around!!!

 

How about High Noon at the BK @ Hwy 5 in Cabot?

Or the one in town, makes no difference to me.. I picked up some coolant
additive at the dealer today, $9.73

 

I will be there!

 

I don't have a bleeder kit but I will bring the timing light noon at BK on HWY5. Scott are you bringing the girls?

 

Yep. I'll have them in tow.

 

I got the grill all cleaned up and put on the truck.. looks great. Thanks Scott!

I got the filter all cleaned up and put back on the truck, fired it up, and that hissing noise i mentioned was back...

I pushed around on the boots with my finger, when I pushed on the boot on the right, the hissing sped up and the idle changed.. so it would appear that boot is leaking..

Whats the deal. can those be tightened or do i need a new boot?

 

I Meant, the hissing got louder, not that it sped up..