I have a 78 429 that I want to stroke to a 460 for my 68 F100. I am looking for a machine shop that knows 385 heads and can work my D3VE heads.
I am also looking for a garage, farm shed or barn to rent in the Front Royal area. I need room for a least three cars or trucks. It is so I can work on my own stuff not a commercial shop. Thanks

 

C & C machine shop is the place for your 429 460 cyl. heads in manassas,va on centerville road 703-368-7878 machine shop ask for Chris Carter. If you are looking for a Boss 429 Engine thay can hook you up also . You can use Boss 429 cyl. heads , on that 429 or 460 .

Don Cross

 

Thanks. I used to live on Leland Ave in Yorkshire many moons ago. I have been looking at the new SCJ heads the flow rates are impressive but priced about equal to my monthly social security check each. I will get with C & C to see what it will cost to open my D3VE heads up or replace them with D0VE or stock SCJ heads. What gives me the best bang for the least bucks will have to work. Thanks

 

Lived in Yorkshire all my life still live on rugby road one block over from me dad had Sunoco & Exxon stations now you know who i am.

Don Cross