Hey guys just wanted to say Hi, and that i enjoy all of the support that everybody gives to everybody else. I have been around FTE for 4 years kind of a ghost though. Would like to try and start helping everybody out. I had a 99 250 with a v10 and 216000 and just picked up an 02' f350 with a 7.3. Sorry about the winded post. Hope I will be able to help and also ask alot of questions about hopping up the 7.3, as I am new to the trucks side have had tractors and have excavator but dont do to many power mods to those. Thanks and have a good day-

 

Welcome aboard bigjake and hopefully this site will help you save money as opposed to spending on the the PMS mods. You know you will do it, we all have but it sure is fun.

 

Have already started the mods, put a banks big hoss level 4 chip, trans command, quickspool wheel and housing and big head waste gate. Runs pretty good now. and thanks for the welcome.

 

Welcome to the 7.3 world! Happy to have you on board

 

Welcome BigJake, Do you already have an intake and exhaust, Gauges. It will help alot if you put all of your info in your sig. Look whos talkin, I haven't updated mine lately either.

 

Welcome BigJake,great handle! Great Movie too!! I'm still kinda knew myself, but I am enjoying the hospitalitly the conversation and the Help. These guy's are great!! Take Care, Country

 

never could figure how to havea sig or put any mods in it

 

Am looking on how to ad a sig also! Let me know if you figure it out and I will do the same.

 

Dang Rookies!! LOL Yeah me too.. HAAHH..Country

 

look on the top of this threead, where it welcomes you, click on it, take a look on the left hand side, it should give you and option to edit your sig.. Good Luck!! it took me a while to find, and i was to foolish to ask.

By the way, Welcome

 

Welcome BigJake. I am much newer than yourself but enjoy
the heck out of this sight. Have not attepted the sig line
yet. Not much for mods done at this point anyway. Always
enjoy another view.

 

Welcome BigJake to get to your sig right click on user cp in the blue line above this thread then you will see all your options.

 

Now see, theres proof I should have asked in the first place, but your forgot you have to click open.

 

Still cant find any sigiture editing info in user cp?

 

Right click user CP, then click on open, then your options will arrive