Big Trucks
#1
Big Trucks
I was just wondering . How many are working on F-4,or larger trucks.
I have two of them {48 F-4s}. One I will rebild for general cargo use. And the orther I want to add a fifth wheel to haul around my three Fordson "F" tractorsto shows. 1919,1922,1924.
Ford in eveything you do.
I have two of them {48 F-4s}. One I will rebild for general cargo use. And the orther I want to add a fifth wheel to haul around my three Fordson "F" tractorsto shows. 1919,1922,1924.
Ford in eveything you do.
#3
I Have a 48 F-5 With Mason Dump.
Currently stripped to the frame. The Frame liners are bad, I'm replacing them.
Got $700 in the front end, A T-98 syncroed 4 speed (with PTO) tranny from Chucks Trucks, got rid of the chash box tranny. Just had my 5-bolt SOLID rims power coated, not more Split rims!!!!!!!!!!
New 9R22.5 tires.
Currently stripped to the frame. The Frame liners are bad, I'm replacing them.
Got $700 in the front end, A T-98 syncroed 4 speed (with PTO) tranny from Chucks Trucks, got rid of the chash box tranny. Just had my 5-bolt SOLID rims power coated, not more Split rims!!!!!!!!!!
New 9R22.5 tires.
#6
#7
Trending Topics
#8
#10
Another 55 F-600?
I thought I was the only one!! Man these things are scarce!
Check out my gallery. I have a few pictures in there.
I have 9.00-20 radials on it and 3 piece rims Goodyear recaps on the back and TOYO radials on the front.. I had a really hard time finding wheels so I had to buy rebuilt wheels fro Les Schwab. Had them powder coated.
I also had to replace the whole brake system. What a job! I also rebuilt the whole front end.
Now I'm grounded by the front crank pulley (54-55 239 V-8) . I can't find one!!(mine is broken)
I'll need a crank pulley with 1 narrow and 1 wide groove and a wide groove fan pulley...Anybody got this stuff in the junk box looking for a home?
Regards,
Rick
I thought I was the only one!! Man these things are scarce!
Check out my gallery. I have a few pictures in there.
I have 9.00-20 radials on it and 3 piece rims Goodyear recaps on the back and TOYO radials on the front.. I had a really hard time finding wheels so I had to buy rebuilt wheels fro Les Schwab. Had them powder coated.
I also had to replace the whole brake system. What a job! I also rebuilt the whole front end.
Now I'm grounded by the front crank pulley (54-55 239 V-8) . I can't find one!!(mine is broken)
I'll need a crank pulley with 1 narrow and 1 wide groove and a wide groove fan pulley...Anybody got this stuff in the junk box looking for a home?
Regards,
Rick
Originally Posted by Okie-Dokie
Got a '55 F-600 with a hydrolic flat bed. Runs like a sewing machine, looks like the grapes of wrath. Got Sheet Metal?
#11
I have a 1949 F-5 with Marmon-Herrington All Wheel Drive conversion, in pretty good original condition (was always garaged). Has a flathead V-8 with original non-synchro four speed and two speed transfer case.
Also have a completely restored 1959 F-600 short wheelbase rack body truck. Has a completely rebuilt 292 V-8 with five speed Clark transmission and two speed Eaton rear axle.
Also have a completely restored 1959 F-600 short wheelbase rack body truck. Has a completely rebuilt 292 V-8 with five speed Clark transmission and two speed Eaton rear axle.
#13