I think that's right I'll have to look tomorrow. About that truck I think my brother in law might actually buy it. Kind of sucks on my part because I know who's going to get stuck fixing it! I know exactly what he'll say "hey can you come over and help me work on my truck" mean while I spend 6 hours wrenching while he sits back and drinks his beer. I'll let you know if he changes his mind though.

 

Was patching a couple holes in my rear tank so I could remove the cobbled front one from the previous owner and when I dropped the one I realized it's for a 76 F250 Camper Special. So does anyone need it? Previous owner said there was rust in it and it plugged the carb all the time, I think it was from the lines not the tank none of the gas I drained had rust in it.

The outside is pretty much rust free I haven't looked inside. I'm putting here first so I don't have to worry about airing it out for shipping (anyone know a good easy way besides opening it up?) I can meet you somewhere close to home or something. Next week or the week after I'll throw it in the classifieds and then ebay if it still don't sell.

Price? What are you willing to pay I don't need it. It's way to big for the spot in the truck. Would like to trade for a good front tank to fit 79 F150 4x4. If you got one.

 

428CJ iron exhaust manifolds with spacer - $500
C4 Bellhousing/Converter(24K miles)/New flywheel for '77 302 Mustang - offer
'77 460 heads/bare - $75obo
Breather Tube that bolts to back of 427 Ford Aluminum Intake- $50 obo.
1969 Mustang 9" center section/3.00:1 open carrier with tag - $75
1970 Mustang RH/LH Fenders/ Some putty for dings&dents/rust minimal -$200
69/70 Mustang front buckets/ Standard interior / minor foam damage on drivers/ need recovered - $150obo
Tranny Cooler from '89 F250/ no leaks - $50obo
Have 15 John Deere "dealer" hats from around the NE USA. Some are the cheap ones, some are nice embroidered one - $15 ea.

I can provide pics of all this stuff. I cant think of much I'd take in trade. Need cash more than anything. Can help in delivery within an hour from Wayland, IA or Ottumwa, IA for gas money. Let me know if you have questions.

Stryder

 

Hey guys/gals... My wife finaly said I can start looking for a dog


I am looking for a German Shepard or a Rot They don't have to be pure bread because I wont pay much if anything for it ( yes I am a cheapskate ) If any of yall know of anyone with german or rot pups near Dubuque I would appriciate yall letting me know


Thanx
Bill

 

I was replacing the electric motor in the wifes bronco, and busted the window, so to get me out of the dog house does anyone have a window glass from a later model bronco, I think any from 80 on will fit, either that or I am gonna have to go get a new one, but thought I would check here first.

 

Monster, Let me call the local scrap yard I know they have a couple broncos. I will find out if they have one and how much

 

I did that with a rock mowing once, blew out the rear window in my 78 Cherokee... right before I delivered it to my cousin. But the good news on that was that it had sat for 3 years with windows down, so it didn't get hurt by that.

 

F150 window will work also.

 

Sorry an F150 window will not work, they don't roll up, and down, thus do not have the provisions to hook to the window mechanisms.

 

You must be talking about the window in the tailgate. I thought you meant the door.

 

yep tailgate glass, sorry I didn't specify that, just reread that, and seen all I said was window glass. Sorry.

 

Stop being so.........sorry! LOL

 

Not sure if I posted these before, but I have a set of "Like New" 33x14.50x15 Mickey Thompson Baja Belted HP tires for sale. Group discounted to $350. Just trying to move them before winter to make room.

Pictures of them at http://john.frieltek.com/toomanyfords/

In Iowa, will drive half way too!

PS: Roger, thanks again for the rear window and the hood cable!!

 

Brand new TCI 441300 Street Fighter torque converter. Fits '66-'84 C-6 with 1.375 Crank Pilot 289-302, 351, 400, 429/460.

Bought it new in August for my 79, installed it, drove it 12 miles and knew it was too much for the truck. I went back to less of a cam and put the factory torque converter back in. If you have a 460 with a cam in it, you'd really like this one. My 351 was just not a good fit for it.

Paid $375 from Summit for it. Would like to get $250 for it. I'm giving the gang first crack at it before listing on eBay.

If you have questions, just ask. If you want to see it, come on up!

John

 

Well iv got an 84 4x4 and it has the small 14" wheels on it and they need to go. Im looking for a set of 15" rims i dont care if they are the decent looking stock ones off other models. Mine are they ugly ones that you see on cars if you pop the hub caps off . So if anyone has a set or know where i can pick up some drop a message here im in Des Moines. Pics would be nice cause there was a couple styles i seen on some of the newer rangers and i dont really like them.