Can Somepeople post some photos of either a 6" or 8" Lift on their Superduty. Preferably a 99' - Present. Thanks. When i search the internet all i find is some photos without it saying how big it is, so i never know.
hey, u got any more pics? i'd like to see you rig from a few diff angles as i am getting ready for new tires and have pretty much decided on 39.5x18 inch boggers..... and would like to see how much they stick out.
2012 F250//2010 JK PICS
Anyone know what they charged you or what the average Install Fee would be to install a 6-8" Lift. Not how much it costs, but how much labor costs. Thanks for putting up with all my questions. I just a newbie.
[updated:LAST EDITED ON 27-Jun-02 AT 02:15 AM (EST)]Brad,
Check out that link you posted a while back for someone who wanted lifted SD pics. There are a bunch of SDs with the 39.5x18 Boggers. I think they look good and they'd be my choice of a new set.
Off the subject... what do you think of American Ironhorse bikes? Specifically the Texas Chopper and the Tejas? I'm looking to get one (prob. the Chopper), but don't know anyone who has the Ironhorse bikes (only Harleys).
[updated:LAST EDITED ON 27-Jun-02 AT 02:06 PM (EST)]>Off the subject... what do you think of American Ironhorse
>bikes? Specifically the Texas Chopper and the Tejas? I'm
>looking to get one (prob. the Chopper), but don't know
>anyone who has the Ironhorse bikes (only Harleys).
I am kind of a bigot when it comes to bikes.... only a Harley will do
but... any of the aftermarket companies are pretty much the same... they all use the same basic parts (S&S engines). I would not fret over the company as long as they warrant the bike and you have a local place that will preform warranty the work. I know several guys with bikes built by the other companies (Ultra, CMC, etc) and they all have problems that a Harley would not have... but you have to give up some reliability for the 'cool' factor..... I ride an old 56 panhead and am presented with lots of mechanical failures.
2012 F250//2010 JK PICS
[updated:LAST EDITED ON 27-Jun-02 AT 01:23 PM (EST)]Check out my gallery I have a 6" skyjacker on her! they charged me $550 for the install (I know the manager)4 wheel parts! did a great job!
Have you looked at the Big dogs at all I like the style of those bikes much better! I looked into the ironhorses last year with my brother he ended up with a new Big Dog (Bulldog) the mastiff is a hot bike as well go to Big Dog.com!!!!! The horses were very nice bikes as well it was a hard decision for him!!!!!
I have looked at the Big Dog bikes, but I personally like the Ironhorse (Texas Chopper & Tejas) better. These bikes do come with a 3 year warranty and there is a shop here in town that sells and works on them. I too like the Harley, but I just can't justify buying one and pretty much re-doing the whole bike to get it to how I want it to look That's why I'm looking into the Ironhorse. So Brad, what kind of problems are you talking about with the S&S motors?
Will look around for those pics. Might have some of it with 38/15.50 Swampers. I will definately have to get some pics of it now. New paint and 44's. With the fender flares and 12" wide wheels, the tires sidewall only sticks out a little. The tread is completely covered.
>Can Somepeople post some photos of either a 6" or 8" Lift on
>their Superduty. Preferably a 99' - Present. Thanks. When i
>search the internet all i find is some photos without it
>saying how big it is, so i never know.
>Thank in advance
Here's what your looking for !!!!
[link:community.webshots.com/user/badsuv|lifted superdutys all sizes]
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.